# This is an auto-generated file. DO NOT EDIT
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-serviceaccount.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: argocd-redis-ha
  namespace: "argocd"
  labels:
    heritage: Helm
    release: argocd
    chart: redis-ha-4.33.2
    app: argocd-redis-ha
secrets:
- name: argocd-redis
---
# Source: redis-ha/charts/redis-ha/templates/redis-haproxy-serviceaccount.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: argocd-redis-ha-haproxy
  namespace: "argocd"
  labels:
    heritage: Helm
    release: argocd
    chart: redis-ha-4.33.2
    app: argocd-redis-ha
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-configmap.yaml
apiVersion: v1
kind: ConfigMap
metadata:
  name: argocd-redis-ha-configmap
  namespace: "argocd"
  labels:
    heritage: Helm
    release: argocd
    chart: redis-ha-4.33.2
    app: argocd-redis-ha
data:
  redis.conf: |
    dir "/data"
    port 6379
    rename-command FLUSHDB ""
    rename-command FLUSHALL ""
    bind 0.0.0.0
    maxmemory 0
    maxmemory-policy volatile-lru
    min-replicas-max-lag 5
    min-replicas-to-write 1
    rdbchecksum yes
    rdbcompression yes
    repl-diskless-sync yes
    save ""
    requirepass replace-default-auth
    masterauth replace-default-auth

  sentinel.conf: |
    dir "/data"
    port 26379
    bind 0.0.0.0
        sentinel down-after-milliseconds argocd 10000
        sentinel failover-timeout argocd 180000
        maxclients 10000
        sentinel parallel-syncs argocd 5
    sentinel auth-pass argocd replace-default-auth

  init.sh: |
    echo "$(date) Start..."
    HOSTNAME="$(hostname)"
    INDEX="${HOSTNAME##*-}"
    SENTINEL_PORT=26379
    ANNOUNCE_IP=''
    MASTER=''
    MASTER_GROUP="argocd"
    QUORUM="2"
    REDIS_CONF=/data/conf/redis.conf
    REDIS_PORT=6379
    REDIS_TLS_PORT=
    SENTINEL_CONF=/data/conf/sentinel.conf
    SENTINEL_TLS_PORT=
    SERVICE=argocd-redis-ha
    SENTINEL_TLS_REPLICATION_ENABLED=false
    REDIS_TLS_REPLICATION_ENABLED=false

    set -eu
    sentinel_get_master() {
    set +e
        if [ "$SENTINEL_PORT" -eq 0 ]; then
            redis-cli -h "${SERVICE}" -p "${SENTINEL_TLS_PORT}"  --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key sentinel get-master-addr-by-name "${MASTER_GROUP}" |\
            grep -E '((^\s*((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))\s*$)|(^\s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:)))(%.+)?s*$))'
        else
            redis-cli -h "${SERVICE}" -p "${SENTINEL_PORT}"  sentinel get-master-addr-by-name "${MASTER_GROUP}" |\
            grep -E '((^\s*((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))\s*$)|(^\s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:)))(%.+)?s*$))'
        fi
    set -e
    }

    sentinel_get_master_retry() {
        master=''
        retry=${1}
        sleep=3
        for i in $(seq 1 "${retry}"); do
            master=$(sentinel_get_master)
            if [ -n "${master}" ]; then
                break
            fi
            sleep $((sleep + i))
        done
        echo "${master}"
    }

    identify_master() {
        echo "Identifying redis master (get-master-addr-by-name).."
        echo "  using sentinel (argocd-redis-ha), sentinel group name (argocd)"
        MASTER="$(sentinel_get_master_retry 3)"
        if [ -n "${MASTER}" ]; then
            echo "  $(date) Found redis master (${MASTER})"
        else
            echo "  $(date) Did not find redis master (${MASTER})"
        fi
    }

    sentinel_update() {
        echo "Updating sentinel config.."
        echo "  evaluating sentinel id (\${SENTINEL_ID_${INDEX}})"
        eval MY_SENTINEL_ID="\$SENTINEL_ID_${INDEX}"
        echo "  sentinel id (${MY_SENTINEL_ID}), sentinel grp (${MASTER_GROUP}), quorum (${QUORUM})"
        sed -i "1s/^/sentinel myid ${MY_SENTINEL_ID}\\n/" "${SENTINEL_CONF}"
        if [ "$SENTINEL_TLS_REPLICATION_ENABLED" = true ]; then
            echo "  redis master (${1}:${REDIS_TLS_PORT})"
            sed -i "2s/^/sentinel monitor ${MASTER_GROUP} ${1} ${REDIS_TLS_PORT} ${QUORUM} \\n/" "${SENTINEL_CONF}"
        else
            echo "  redis master (${1}:${REDIS_PORT})"
            sed -i "2s/^/sentinel monitor ${MASTER_GROUP} ${1} ${REDIS_PORT} ${QUORUM} \\n/" "${SENTINEL_CONF}"
        fi
        echo "sentinel announce-ip ${ANNOUNCE_IP}" >> ${SENTINEL_CONF}
        if [ "$SENTINEL_PORT" -eq 0 ]; then
            echo "  announce (${ANNOUNCE_IP}:${SENTINEL_TLS_PORT})"
            echo "sentinel announce-port ${SENTINEL_TLS_PORT}" >> ${SENTINEL_CONF}
        else
            echo "  announce (${ANNOUNCE_IP}:${SENTINEL_PORT})"
            echo "sentinel announce-port ${SENTINEL_PORT}" >> ${SENTINEL_CONF}
        fi
    }

    redis_update() {
        echo "Updating redis config.."
        if [ "$REDIS_TLS_REPLICATION_ENABLED" = true ]; then
            echo "  we are slave of redis master (${1}:${REDIS_TLS_PORT})"
            echo "slaveof ${1} ${REDIS_TLS_PORT}" >> "${REDIS_CONF}"
            echo "slave-announce-port ${REDIS_TLS_PORT}" >> ${REDIS_CONF}
        else
            echo "  we are slave of redis master (${1}:${REDIS_PORT})"
            echo "slaveof ${1} ${REDIS_PORT}" >> "${REDIS_CONF}"
            echo "slave-announce-port ${REDIS_PORT}" >> ${REDIS_CONF}
        fi
        echo "slave-announce-ip ${ANNOUNCE_IP}" >> ${REDIS_CONF}
    }

    copy_config() {
        echo "Copying default redis config.."
        echo "  to '${REDIS_CONF}'"
        cp /readonly-config/redis.conf "${REDIS_CONF}"
        echo "Copying default sentinel config.."
        echo "  to '${SENTINEL_CONF}'"
        cp /readonly-config/sentinel.conf "${SENTINEL_CONF}"
    }

    setup_defaults() {
        echo "Setting up defaults.."
        echo "  using statefulset index (${INDEX})"
        if [ "${INDEX}" = "0" ]; then
            echo "Setting this pod as master for redis and sentinel.."
            echo "  using announce (${ANNOUNCE_IP})"
            redis_update "${ANNOUNCE_IP}"
            sentinel_update "${ANNOUNCE_IP}"
            echo "  make sure ${ANNOUNCE_IP} is not a slave (slaveof no one)"
            sed -i "s/^.*slaveof.*//" "${REDIS_CONF}"
        else
            echo "Getting redis master ip.."
            echo "  blindly assuming (${SERVICE}-announce-0) or (${SERVICE}-server-0) are master"
            DEFAULT_MASTER="$(getent_hosts 0 | awk '{ print $1 }')"
            if [ -z "${DEFAULT_MASTER}" ]; then
                echo "Error: Unable to resolve redis master (getent hosts)."
                exit 1
            fi
            echo "  identified redis (may be redis master) ip (${DEFAULT_MASTER})"
            echo "Setting default slave config for redis and sentinel.."
            echo "  using master ip (${DEFAULT_MASTER})"
            redis_update "${DEFAULT_MASTER}"
            sentinel_update "${DEFAULT_MASTER}"
        fi
    }

    redis_ping() {
    set +e
        if [ "$REDIS_PORT" -eq 0 ]; then
            redis-cli -h "${MASTER}" -a "${AUTH}" --no-auth-warning -p "${REDIS_TLS_PORT}" --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key ping
        else
            redis-cli -h "${MASTER}" -a "${AUTH}" --no-auth-warning -p "${REDIS_PORT}" ping
        fi
    set -e
    }

    redis_ping_retry() {
        ping=''
        retry=${1}
        sleep=3
        for i in $(seq 1 "${retry}"); do
            if [ "$(redis_ping)" = "PONG" ]; then
               ping='PONG'
               break
            fi
            sleep $((sleep + i))
            MASTER=$(sentinel_get_master)
        done
        echo "${ping}"
    }

    find_master() {
        echo "Verifying redis master.."
        if [ "$REDIS_PORT" -eq 0 ]; then
            echo "  ping (${MASTER}:${REDIS_TLS_PORT})"
        else
            echo "  ping (${MASTER}:${REDIS_PORT})"
        fi
        if [ "$(redis_ping_retry 3)" != "PONG" ]; then
            echo "  $(date) Can't ping redis master (${MASTER})"
            echo "Attempting to force failover (sentinel failover).."

            if [ "$SENTINEL_PORT" -eq 0 ]; then
                echo "  on sentinel (${SERVICE}:${SENTINEL_TLS_PORT}), sentinel grp (${MASTER_GROUP})"
                if redis-cli -h "${SERVICE}" -p "${SENTINEL_TLS_PORT}"  --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key sentinel failover "${MASTER_GROUP}" | grep -q 'NOGOODSLAVE' ; then
                    echo "  $(date) Failover returned with 'NOGOODSLAVE'"
                    echo "Setting defaults for this pod.."
                    setup_defaults
                    return 0
                fi
            else
                echo "  on sentinel (${SERVICE}:${SENTINEL_PORT}), sentinel grp (${MASTER_GROUP})"
                if redis-cli -h "${SERVICE}" -p "${SENTINEL_PORT}"  sentinel failover "${MASTER_GROUP}" | grep -q 'NOGOODSLAVE' ; then
                    echo "  $(date) Failover returned with 'NOGOODSLAVE'"
                    echo "Setting defaults for this pod.."
                    setup_defaults
                    return 0
                fi
            fi

            echo "Hold on for 10sec"
            sleep 10
            echo "We should get redis master's ip now. Asking (get-master-addr-by-name).."
            if [ "$SENTINEL_PORT" -eq 0 ]; then
                echo "  sentinel (${SERVICE}:${SENTINEL_TLS_PORT}), sentinel grp (${MASTER_GROUP})"
            else
                echo "  sentinel (${SERVICE}:${SENTINEL_PORT}), sentinel grp (${MASTER_GROUP})"
            fi
            MASTER="$(sentinel_get_master)"
            if [ "${MASTER}" ]; then
                echo "  $(date) Found redis master (${MASTER})"
                echo "Updating redis and sentinel config.."
                sentinel_update "${MASTER}"
                redis_update "${MASTER}"
            else
                echo "$(date) Error: Could not failover, exiting..."
                exit 1
            fi
        else
            echo "  $(date) Found reachable redis master (${MASTER})"
            echo "Updating redis and sentinel config.."
            sentinel_update "${MASTER}"
            redis_update "${MASTER}"
        fi
    }

    redis_ro_update() {
        echo "Updating read-only redis config.."
        echo "  redis.conf set 'replica-priority 0'"
        echo "replica-priority 0" >> ${REDIS_CONF}
    }

    getent_hosts() {
        index=${1:-${INDEX}}
        service="${SERVICE}-announce-${index}"
        host=$(getent hosts "${service}")
        echo "${host}"
    }

    identify_announce_ip() {
        echo "Identify announce ip for this pod.."
        echo "  using (${SERVICE}-announce-${INDEX}) or (${SERVICE}-server-${INDEX})"
        ANNOUNCE_IP=$(getent_hosts | awk '{ print $1 }')
        echo "  identified announce (${ANNOUNCE_IP})"
    }

    mkdir -p /data/conf/

    echo "Initializing config.."
    copy_config

    # where is redis master
    identify_master

    identify_announce_ip

    if [ -z "${ANNOUNCE_IP}" ]; then
        "Error: Could not resolve the announce ip for this pod"
        exit 1
    elif [ "${MASTER}" ]; then
        find_master
    else
        setup_defaults
    fi

    if [ "${AUTH:-}" ]; then
        echo "Setting redis auth values.."
        ESCAPED_AUTH=$(echo "${AUTH}" | sed -e 's/[\/&]/\\&/g');
        sed -i "s/replace-default-auth/${ESCAPED_AUTH}/" "${REDIS_CONF}" "${SENTINEL_CONF}"
    fi

    if [ "${SENTINELAUTH:-}" ]; then
        echo "Setting sentinel auth values"
        ESCAPED_AUTH_SENTINEL=$(echo "$SENTINELAUTH" | sed -e 's/[\/&]/\\&/g');
        sed -i "s/replace-default-sentinel-auth/${ESCAPED_AUTH_SENTINEL}/" "$SENTINEL_CONF"
    fi

    echo "$(date) Ready..."

  fix-split-brain.sh: |
    HOSTNAME="$(hostname)"
    INDEX="${HOSTNAME##*-}"
    SENTINEL_PORT=26379
    ANNOUNCE_IP=''
    MASTER=''
    MASTER_GROUP="argocd"
    QUORUM="2"
    REDIS_CONF=/data/conf/redis.conf
    REDIS_PORT=6379
    REDIS_TLS_PORT=
    SENTINEL_CONF=/data/conf/sentinel.conf
    SENTINEL_TLS_PORT=
    SERVICE=argocd-redis-ha
    SENTINEL_TLS_REPLICATION_ENABLED=false
    REDIS_TLS_REPLICATION_ENABLED=false

    ROLE=''
    REDIS_MASTER=''

    set -eu
    sentinel_get_master() {
    set +e
        if [ "$SENTINEL_PORT" -eq 0 ]; then
            redis-cli -h "${SERVICE}" -p "${SENTINEL_TLS_PORT}"  --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key sentinel get-master-addr-by-name "${MASTER_GROUP}" |\
            grep -E '((^\s*((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))\s*$)|(^\s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:)))(%.+)?s*$))'
        else
            redis-cli -h "${SERVICE}" -p "${SENTINEL_PORT}"  sentinel get-master-addr-by-name "${MASTER_GROUP}" |\
            grep -E '((^\s*((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]))\s*$)|(^\s*((([0-9A-Fa-f]{1,4}:){7}([0-9A-Fa-f]{1,4}|:))|(([0-9A-Fa-f]{1,4}:){6}(:[0-9A-Fa-f]{1,4}|((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){5}(((:[0-9A-Fa-f]{1,4}){1,2})|:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3})|:))|(([0-9A-Fa-f]{1,4}:){4}(((:[0-9A-Fa-f]{1,4}){1,3})|((:[0-9A-Fa-f]{1,4})?:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){3}(((:[0-9A-Fa-f]{1,4}){1,4})|((:[0-9A-Fa-f]{1,4}){0,2}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){2}(((:[0-9A-Fa-f]{1,4}){1,5})|((:[0-9A-Fa-f]{1,4}){0,3}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(([0-9A-Fa-f]{1,4}:){1}(((:[0-9A-Fa-f]{1,4}){1,6})|((:[0-9A-Fa-f]{1,4}){0,4}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:))|(:(((:[0-9A-Fa-f]{1,4}){1,7})|((:[0-9A-Fa-f]{1,4}){0,5}:((25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)(\.(25[0-5]|2[0-4]\d|1\d\d|[1-9]?\d)){3}))|:)))(%.+)?s*$))'
        fi
    set -e
    }

    sentinel_get_master_retry() {
        master=''
        retry=${1}
        sleep=3
        for i in $(seq 1 "${retry}"); do
            master=$(sentinel_get_master)
            if [ -n "${master}" ]; then
                break
            fi
            sleep $((sleep + i))
        done
        echo "${master}"
    }

    identify_master() {
        echo "Identifying redis master (get-master-addr-by-name).."
        echo "  using sentinel (argocd-redis-ha), sentinel group name (argocd)"
        MASTER="$(sentinel_get_master_retry 3)"
        if [ -n "${MASTER}" ]; then
            echo "  $(date) Found redis master (${MASTER})"
        else
            echo "  $(date) Did not find redis master (${MASTER})"
        fi
    }

    sentinel_update() {
        echo "Updating sentinel config.."
        echo "  evaluating sentinel id (\${SENTINEL_ID_${INDEX}})"
        eval MY_SENTINEL_ID="\$SENTINEL_ID_${INDEX}"
        echo "  sentinel id (${MY_SENTINEL_ID}), sentinel grp (${MASTER_GROUP}), quorum (${QUORUM})"
        sed -i "1s/^/sentinel myid ${MY_SENTINEL_ID}\\n/" "${SENTINEL_CONF}"
        if [ "$SENTINEL_TLS_REPLICATION_ENABLED" = true ]; then
            echo "  redis master (${1}:${REDIS_TLS_PORT})"
            sed -i "2s/^/sentinel monitor ${MASTER_GROUP} ${1} ${REDIS_TLS_PORT} ${QUORUM} \\n/" "${SENTINEL_CONF}"
        else
            echo "  redis master (${1}:${REDIS_PORT})"
            sed -i "2s/^/sentinel monitor ${MASTER_GROUP} ${1} ${REDIS_PORT} ${QUORUM} \\n/" "${SENTINEL_CONF}"
        fi
        echo "sentinel announce-ip ${ANNOUNCE_IP}" >> ${SENTINEL_CONF}
        if [ "$SENTINEL_PORT" -eq 0 ]; then
            echo "  announce (${ANNOUNCE_IP}:${SENTINEL_TLS_PORT})"
            echo "sentinel announce-port ${SENTINEL_TLS_PORT}" >> ${SENTINEL_CONF}
        else
            echo "  announce (${ANNOUNCE_IP}:${SENTINEL_PORT})"
            echo "sentinel announce-port ${SENTINEL_PORT}" >> ${SENTINEL_CONF}
        fi
    }

    redis_update() {
        echo "Updating redis config.."
        if [ "$REDIS_TLS_REPLICATION_ENABLED" = true ]; then
            echo "  we are slave of redis master (${1}:${REDIS_TLS_PORT})"
            echo "slaveof ${1} ${REDIS_TLS_PORT}" >> "${REDIS_CONF}"
            echo "slave-announce-port ${REDIS_TLS_PORT}" >> ${REDIS_CONF}
        else
            echo "  we are slave of redis master (${1}:${REDIS_PORT})"
            echo "slaveof ${1} ${REDIS_PORT}" >> "${REDIS_CONF}"
            echo "slave-announce-port ${REDIS_PORT}" >> ${REDIS_CONF}
        fi
        echo "slave-announce-ip ${ANNOUNCE_IP}" >> ${REDIS_CONF}
    }

    copy_config() {
        echo "Copying default redis config.."
        echo "  to '${REDIS_CONF}'"
        cp /readonly-config/redis.conf "${REDIS_CONF}"
        echo "Copying default sentinel config.."
        echo "  to '${SENTINEL_CONF}'"
        cp /readonly-config/sentinel.conf "${SENTINEL_CONF}"
    }

    setup_defaults() {
        echo "Setting up defaults.."
        echo "  using statefulset index (${INDEX})"
        if [ "${INDEX}" = "0" ]; then
            echo "Setting this pod as master for redis and sentinel.."
            echo "  using announce (${ANNOUNCE_IP})"
            redis_update "${ANNOUNCE_IP}"
            sentinel_update "${ANNOUNCE_IP}"
            echo "  make sure ${ANNOUNCE_IP} is not a slave (slaveof no one)"
            sed -i "s/^.*slaveof.*//" "${REDIS_CONF}"
        else
            echo "Getting redis master ip.."
            echo "  blindly assuming (${SERVICE}-announce-0) or (${SERVICE}-server-0) are master"
            DEFAULT_MASTER="$(getent_hosts 0 | awk '{ print $1 }')"
            if [ -z "${DEFAULT_MASTER}" ]; then
                echo "Error: Unable to resolve redis master (getent hosts)."
                exit 1
            fi
            echo "  identified redis (may be redis master) ip (${DEFAULT_MASTER})"
            echo "Setting default slave config for redis and sentinel.."
            echo "  using master ip (${DEFAULT_MASTER})"
            redis_update "${DEFAULT_MASTER}"
            sentinel_update "${DEFAULT_MASTER}"
        fi
    }

    redis_ping() {
    set +e
        if [ "$REDIS_PORT" -eq 0 ]; then
            redis-cli -h "${MASTER}" -a "${AUTH}" --no-auth-warning -p "${REDIS_TLS_PORT}" --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key ping
        else
            redis-cli -h "${MASTER}" -a "${AUTH}" --no-auth-warning -p "${REDIS_PORT}" ping
        fi
    set -e
    }

    redis_ping_retry() {
        ping=''
        retry=${1}
        sleep=3
        for i in $(seq 1 "${retry}"); do
            if [ "$(redis_ping)" = "PONG" ]; then
               ping='PONG'
               break
            fi
            sleep $((sleep + i))
            MASTER=$(sentinel_get_master)
        done
        echo "${ping}"
    }

    find_master() {
        echo "Verifying redis master.."
        if [ "$REDIS_PORT" -eq 0 ]; then
            echo "  ping (${MASTER}:${REDIS_TLS_PORT})"
        else
            echo "  ping (${MASTER}:${REDIS_PORT})"
        fi
        if [ "$(redis_ping_retry 3)" != "PONG" ]; then
            echo "  $(date) Can't ping redis master (${MASTER})"
            echo "Attempting to force failover (sentinel failover).."

            if [ "$SENTINEL_PORT" -eq 0 ]; then
                echo "  on sentinel (${SERVICE}:${SENTINEL_TLS_PORT}), sentinel grp (${MASTER_GROUP})"
                if redis-cli -h "${SERVICE}" -p "${SENTINEL_TLS_PORT}"  --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key sentinel failover "${MASTER_GROUP}" | grep -q 'NOGOODSLAVE' ; then
                    echo "  $(date) Failover returned with 'NOGOODSLAVE'"
                    echo "Setting defaults for this pod.."
                    setup_defaults
                    return 0
                fi
            else
                echo "  on sentinel (${SERVICE}:${SENTINEL_PORT}), sentinel grp (${MASTER_GROUP})"
                if redis-cli -h "${SERVICE}" -p "${SENTINEL_PORT}"  sentinel failover "${MASTER_GROUP}" | grep -q 'NOGOODSLAVE' ; then
                    echo "  $(date) Failover returned with 'NOGOODSLAVE'"
                    echo "Setting defaults for this pod.."
                    setup_defaults
                    return 0
                fi
            fi

            echo "Hold on for 10sec"
            sleep 10
            echo "We should get redis master's ip now. Asking (get-master-addr-by-name).."
            if [ "$SENTINEL_PORT" -eq 0 ]; then
                echo "  sentinel (${SERVICE}:${SENTINEL_TLS_PORT}), sentinel grp (${MASTER_GROUP})"
            else
                echo "  sentinel (${SERVICE}:${SENTINEL_PORT}), sentinel grp (${MASTER_GROUP})"
            fi
            MASTER="$(sentinel_get_master)"
            if [ "${MASTER}" ]; then
                echo "  $(date) Found redis master (${MASTER})"
                echo "Updating redis and sentinel config.."
                sentinel_update "${MASTER}"
                redis_update "${MASTER}"
            else
                echo "$(date) Error: Could not failover, exiting..."
                exit 1
            fi
        else
            echo "  $(date) Found reachable redis master (${MASTER})"
            echo "Updating redis and sentinel config.."
            sentinel_update "${MASTER}"
            redis_update "${MASTER}"
        fi
    }

    redis_ro_update() {
        echo "Updating read-only redis config.."
        echo "  redis.conf set 'replica-priority 0'"
        echo "replica-priority 0" >> ${REDIS_CONF}
    }

    getent_hosts() {
        index=${1:-${INDEX}}
        service="${SERVICE}-announce-${index}"
        host=$(getent hosts "${service}")
        echo "${host}"
    }

    identify_announce_ip() {
        echo "Identify announce ip for this pod.."
        echo "  using (${SERVICE}-announce-${INDEX}) or (${SERVICE}-server-${INDEX})"
        ANNOUNCE_IP=$(getent_hosts | awk '{ print $1 }')
        echo "  identified announce (${ANNOUNCE_IP})"
    }

    redis_role() {
    set +e
        if [ "$REDIS_PORT" -eq 0 ]; then
            ROLE=$(redis-cli  -a "${AUTH}" --no-auth-warning -p "${REDIS_TLS_PORT}" --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key info | grep role | sed 's/role://' | sed 's/\r//')
        else
            ROLE=$(redis-cli  -a "${AUTH}" --no-auth-warning -p "${REDIS_PORT}" info | grep role | sed 's/role://' | sed 's/\r//')
        fi
    set -e
    }

    identify_redis_master() {
    set +e
        if [ "$REDIS_PORT" -eq 0 ]; then
            REDIS_MASTER=$(redis-cli  -a "${AUTH}" --no-auth-warning -p "${REDIS_TLS_PORT}" --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key info | grep master_host | sed 's/master_host://' | sed 's/\r//')
        else
            REDIS_MASTER=$(redis-cli  -a "${AUTH}" --no-auth-warning -p "${REDIS_PORT}" info | grep master_host | sed 's/master_host://' | sed 's/\r//')
        fi
    set -e
    }

    reinit() {
    set +e
        sh /readonly-config/init.sh

        if [ "$REDIS_PORT" -eq 0 ]; then
            echo "shutdown" | redis-cli  -a "${AUTH}" --no-auth-warning -p "${REDIS_TLS_PORT}" --tls --cacert /tls-certs/ca.crt  --cert /tls-certs/redis.crt --key /tls-certs/redis.key
        else
            echo "shutdown" | redis-cli  -a "${AUTH}" --no-auth-warning -p "${REDIS_PORT}"
        fi
    set -e
    }

    identify_announce_ip

    while [ -z "${ANNOUNCE_IP}" ]; do
        echo "Error: Could not resolve the announce ip for this pod."
        sleep 30
        identify_announce_ip
    done

    trap "exit 0" TERM
    while true; do
        sleep 60

        # where is redis master
        identify_master

        if [ "$MASTER" = "$ANNOUNCE_IP" ]; then
            redis_role
            if [ "$ROLE" != "master" ]; then
                reinit
            fi
        elif [ "${MASTER}" ]; then
            identify_redis_master
            if [ "$REDIS_MASTER" != "$MASTER" ]; then
                reinit
            fi
        fi
    done


  haproxy.cfg: |
    defaults REDIS
      mode tcp
      timeout connect 4s
      timeout server 6m
      timeout client 6m
      timeout check 2s

    listen health_check_http_url
      bind :8888  
      mode http
      monitor-uri /healthz
      option      dontlognull
    # Check Sentinel and whether they are nominated master
    backend check_if_redis_is_master_0
      mode tcp
      option tcp-check
      tcp-check connect
      tcp-check send PING\r\n
      tcp-check expect string +PONG
      tcp-check send SENTINEL\ get-master-addr-by-name\ argocd\r\n
      tcp-check expect string REPLACE_ANNOUNCE0
      tcp-check send QUIT\r\n
      server R0 argocd-redis-ha-announce-0:26379 check inter 3s
      server R1 argocd-redis-ha-announce-1:26379 check inter 3s
      server R2 argocd-redis-ha-announce-2:26379 check inter 3s
    # Check Sentinel and whether they are nominated master
    backend check_if_redis_is_master_1
      mode tcp
      option tcp-check
      tcp-check connect
      tcp-check send PING\r\n
      tcp-check expect string +PONG
      tcp-check send SENTINEL\ get-master-addr-by-name\ argocd\r\n
      tcp-check expect string REPLACE_ANNOUNCE1
      tcp-check send QUIT\r\n
      server R0 argocd-redis-ha-announce-0:26379 check inter 3s
      server R1 argocd-redis-ha-announce-1:26379 check inter 3s
      server R2 argocd-redis-ha-announce-2:26379 check inter 3s
    # Check Sentinel and whether they are nominated master
    backend check_if_redis_is_master_2
      mode tcp
      option tcp-check
      tcp-check connect
      tcp-check send PING\r\n
      tcp-check expect string +PONG
      tcp-check send SENTINEL\ get-master-addr-by-name\ argocd\r\n
      tcp-check expect string REPLACE_ANNOUNCE2
      tcp-check send QUIT\r\n
      server R0 argocd-redis-ha-announce-0:26379 check inter 3s
      server R1 argocd-redis-ha-announce-1:26379 check inter 3s
      server R2 argocd-redis-ha-announce-2:26379 check inter 3s

    # decide redis backend to use
    #master
    frontend ft_redis_master
      bind :6379 
      use_backend bk_redis_master
    # Check all redis servers to see if they think they are master
    backend bk_redis_master
      mode tcp
      option tcp-check
      tcp-check connect
      tcp-check send "AUTH ${AUTH}"\r\n
      tcp-check expect string +OK
      tcp-check send PING\r\n
      tcp-check expect string +PONG
      tcp-check send info\ replication\r\n
      tcp-check expect string role:master
      tcp-check send QUIT\r\n
      tcp-check expect string +OK
      use-server R0 if { srv_is_up(R0) } { nbsrv(check_if_redis_is_master_0) ge 2 }
      server R0 argocd-redis-ha-announce-0:6379 check inter 3s fall 1 rise 1
      use-server R1 if { srv_is_up(R1) } { nbsrv(check_if_redis_is_master_1) ge 2 }
      server R1 argocd-redis-ha-announce-1:6379 check inter 3s fall 1 rise 1
      use-server R2 if { srv_is_up(R2) } { nbsrv(check_if_redis_is_master_2) ge 2 }
      server R2 argocd-redis-ha-announce-2:6379 check inter 3s fall 1 rise 1
    frontend stats
      mode http
      bind :9101 
      http-request use-service prometheus-exporter if { path /metrics }
      stats enable
      stats uri /stats
      stats refresh 10s
    # Additional configuration
    global
      maxconn 4096
    
  haproxy_init.sh: |
    HAPROXY_CONF=/data/haproxy.cfg
    cp /readonly/haproxy.cfg "$HAPROXY_CONF"
    for loop in $(seq 1 10); do
      getent hosts argocd-redis-ha-announce-0 && break
      echo "Waiting for service argocd-redis-ha-announce-0 to be ready ($loop) ..." && sleep 1
    done
    ANNOUNCE_IP0=$(getent hosts "argocd-redis-ha-announce-0" | awk '{ print $1 }')
    if [ -z "$ANNOUNCE_IP0" ]; then
      echo "Could not resolve the announce ip for argocd-redis-ha-announce-0"
      exit 1
    fi
    sed -i "s/REPLACE_ANNOUNCE0/$ANNOUNCE_IP0/" "$HAPROXY_CONF"
    for loop in $(seq 1 10); do
      getent hosts argocd-redis-ha-announce-1 && break
      echo "Waiting for service argocd-redis-ha-announce-1 to be ready ($loop) ..." && sleep 1
    done
    ANNOUNCE_IP1=$(getent hosts "argocd-redis-ha-announce-1" | awk '{ print $1 }')
    if [ -z "$ANNOUNCE_IP1" ]; then
      echo "Could not resolve the announce ip for argocd-redis-ha-announce-1"
      exit 1
    fi
    sed -i "s/REPLACE_ANNOUNCE1/$ANNOUNCE_IP1/" "$HAPROXY_CONF"
    for loop in $(seq 1 10); do
      getent hosts argocd-redis-ha-announce-2 && break
      echo "Waiting for service argocd-redis-ha-announce-2 to be ready ($loop) ..." && sleep 1
    done
    ANNOUNCE_IP2=$(getent hosts "argocd-redis-ha-announce-2" | awk '{ print $1 }')
    if [ -z "$ANNOUNCE_IP2" ]; then
      echo "Could not resolve the announce ip for argocd-redis-ha-announce-2"
      exit 1
    fi
    sed -i "s/REPLACE_ANNOUNCE2/$ANNOUNCE_IP2/" "$HAPROXY_CONF"
  trigger-failover-if-master.sh: |
    get_redis_role() {
      is_master=$(
        redis-cli \
          -a "${AUTH}" --no-auth-warning \
          -h localhost \
          -p 6379 \
          info | grep -c 'role:master' || true
      )
    }
    get_redis_role
    if [[ "$is_master" -eq 1 ]]; then
      echo "This node is currently master, we trigger a failover."
      response=$(
        redis-cli \
          -h localhost \
          -p 26379 \
          SENTINEL failover argocd
      )
      if [[ "$response" != "OK" ]] ; then
        echo "$response"
        exit 1
      fi
      timeout=30
      while [[ "$is_master" -eq 1 && $timeout -gt 0 ]]; do
        sleep 1
        get_redis_role
        timeout=$((timeout - 1))
      done
      echo "Failover successful"
    fi
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-health-configmap.yaml
apiVersion: v1
kind: ConfigMap
metadata:
  name: argocd-redis-ha-health-configmap
  namespace: "argocd"
  labels:
    heritage: Helm
    release: argocd
    chart: redis-ha-4.33.2
    app: argocd-redis-ha
data:
  redis_liveness.sh: |
    response=$(
      redis-cli \
        -a "${AUTH}" --no-auth-warning \
        -h localhost \
        -p 6379 \
        ping
    )
    echo "response=$response"
    case $response in
      PONG|LOADING*) ;;
      *) exit 1 ;;
    esac
    exit 0
  redis_readiness.sh: |
    response=$(
      redis-cli \
        -a "${AUTH}" --no-auth-warning \
        -h localhost \
        -p 6379 \
        ping
    )
    if [ "$response" != "PONG" ] ; then
      echo "ping=$response"
      exit 1
    fi

    response=$(
      redis-cli \
        -a "${AUTH}" --no-auth-warning \
        -h localhost \
        -p 6379 \
        role
    )
    role=$( echo "$response" | sed "1!d" )
    if [ "$role" = "master" ]; then
      echo "role=$role"
      exit 0
    elif [ "$role" = "slave" ]; then
      repl=$( echo "$response" | sed "4!d" )
      echo "role=$role; repl=$repl"
      if [ "$repl" = "connected" ]; then
        exit 0
      else
        exit 1
      fi
    else
      echo "role=$role"
      exit 1
    fi
  sentinel_liveness.sh: |
    response=$(
      redis-cli \
        -h localhost \
        -p 26379 \
        ping
    )
    if [ "$response" != "PONG" ]; then
      echo "$response"
      exit 1
    fi
    echo "response=$response"
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-role.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: argocd-redis-ha
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
rules:
- apiGroups:
    - ""
  resources:
    - endpoints
  verbs:
    - get
---
# Source: redis-ha/charts/redis-ha/templates/redis-haproxy-role.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: argocd-redis-ha-haproxy
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
    component: argocd-redis-ha-haproxy
rules:
- apiGroups:
    - ""
  resources:
    - endpoints
  verbs:
    - get
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-rolebinding.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: argocd-redis-ha
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
subjects:
- kind: ServiceAccount
  name: argocd-redis-ha
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: argocd-redis-ha
---
# Source: redis-ha/charts/redis-ha/templates/redis-haproxy-rolebinding.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: argocd-redis-ha-haproxy
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
    component: argocd-redis-ha-haproxy
subjects:
- kind: ServiceAccount
  name: argocd-redis-ha-haproxy
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: argocd-redis-ha-haproxy
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-announce-service.yaml
apiVersion: v1
kind: Service
metadata:
  name: argocd-redis-ha-announce-0
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
  annotations:
spec:
  publishNotReadyAddresses: true
  type: ClusterIP
  ports:
  - name: tcp-server
    port: 6379
    protocol: TCP
    targetPort: redis
  - name: tcp-sentinel
    port: 26379
    protocol: TCP
    targetPort: sentinel
  selector:
    release: argocd
    app: redis-ha
    "statefulset.kubernetes.io/pod-name": argocd-redis-ha-server-0
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-announce-service.yaml
apiVersion: v1
kind: Service
metadata:
  name: argocd-redis-ha-announce-1
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
  annotations:
spec:
  publishNotReadyAddresses: true
  type: ClusterIP
  ports:
  - name: tcp-server
    port: 6379
    protocol: TCP
    targetPort: redis
  - name: tcp-sentinel
    port: 26379
    protocol: TCP
    targetPort: sentinel
  selector:
    release: argocd
    app: redis-ha
    "statefulset.kubernetes.io/pod-name": argocd-redis-ha-server-1
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-announce-service.yaml
apiVersion: v1
kind: Service
metadata:
  name: argocd-redis-ha-announce-2
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
  annotations:
spec:
  publishNotReadyAddresses: true
  type: ClusterIP
  ports:
  - name: tcp-server
    port: 6379
    protocol: TCP
    targetPort: redis
  - name: tcp-sentinel
    port: 26379
    protocol: TCP
    targetPort: sentinel
  selector:
    release: argocd
    app: redis-ha
    "statefulset.kubernetes.io/pod-name": argocd-redis-ha-server-2
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-service.yaml
apiVersion: v1
kind: Service
metadata:
  name: argocd-redis-ha
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
  annotations:
spec:
  type: ClusterIP
  clusterIP: None
  ports:
  - name: tcp-server
    port: 6379
    protocol: TCP
    targetPort: redis
  - name: tcp-sentinel
    port: 26379
    protocol: TCP
    targetPort: sentinel
  selector:
    release: argocd
    app: redis-ha
---
# Source: redis-ha/charts/redis-ha/templates/redis-haproxy-service.yaml
apiVersion: v1
kind: Service
metadata:
  name: argocd-redis-ha-haproxy
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
    component: argocd-redis-ha-haproxy
  annotations:
spec:
  type: ClusterIP
  ports:
  - name: tcp-haproxy
    port: 6379
    protocol: TCP
    targetPort: redis
  - name: http-exporter-port
    port: 9101
    protocol: TCP
    targetPort: metrics-port
  selector:
    release: argocd
    app: redis-ha-haproxy
---
# Source: redis-ha/charts/redis-ha/templates/redis-haproxy-deployment.yaml
kind: Deployment
apiVersion: apps/v1
metadata:
  name: argocd-redis-ha-haproxy
  namespace: "argocd"
  labels:
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
spec:
  strategy:
    type: RollingUpdate
  revisionHistoryLimit: 1
  replicas: 3
  selector:
    matchLabels:
      app: redis-ha-haproxy
      release: argocd
  template:
    metadata:
      name: argocd-redis-ha-haproxy
      labels:
        app: redis-ha-haproxy
        release: argocd
      annotations:
        prometheus.io/port: "9101"
        prometheus.io/scrape: "true"
        prometheus.io/path: "/metrics"
        checksum/config: cd6508bdf9819601c454d0cc491fb77a209e3a88761d92514d105b6681829953
    spec:
      # Needed when using unmodified rbac-setup.yml
      
      serviceAccountName: argocd-redis-ha-haproxy
      securityContext:
        fsGroup: 99
        runAsNonRoot: true
        runAsUser: 99
      automountServiceAccountToken: true
      nodeSelector:
        {}
      tolerations:
        null
      affinity:
        podAntiAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            - labelSelector:
                matchLabels:
                  app: redis-ha-haproxy
                  release: argocd
              topologyKey: kubernetes.io/hostname
      initContainers:
      - name: config-init
        image: public.ecr.aws/docker/library/haproxy:3.0.8-alpine
        imagePullPolicy: IfNotPresent
        resources:
          {}
        command:
        - sh
        args:
        - /readonly/haproxy_init.sh
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          runAsNonRoot: true
          seccompProfile:
            type: RuntimeDefault
        volumeMounts:
        - name: config-volume
          mountPath: /readonly
          readOnly: true
        - name: data
          mountPath: /data
      containers:
      - name: haproxy
        image: public.ecr.aws/docker/library/haproxy:3.0.8-alpine
        imagePullPolicy: IfNotPresent
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          runAsNonRoot: true
          seccompProfile:
            type: RuntimeDefault
        env:
        - name: AUTH
          valueFrom:
            secretKeyRef:
              name: argocd-redis
              key: auth
        livenessProbe:
          httpGet:
            path: /healthz
            port: probe
          initialDelaySeconds: 5
          periodSeconds: 3
        readinessProbe:
          httpGet:
            path: /healthz
            port: probe
          initialDelaySeconds: 5
          periodSeconds: 3
        ports:
        - name: probe
          containerPort: 8888
        - name: redis
          containerPort: 6379
        - name: metrics-port
          containerPort: 9101
        resources:
          {}
        volumeMounts:
        - name: data
          mountPath: /usr/local/etc/haproxy
        - name: shared-socket
          mountPath: /run/haproxy
        lifecycle:
          {}
      volumes:
      - name: config-volume
        configMap:
          name: argocd-redis-ha-configmap
      - name: shared-socket
        emptyDir:
          {}
      - name: data
        emptyDir:
          {}
---
# Source: redis-ha/charts/redis-ha/templates/redis-ha-statefulset.yaml
apiVersion: apps/v1
kind: StatefulSet
metadata:
  name: argocd-redis-ha-server
  namespace: "argocd"
  labels:
    argocd-redis-ha: replica
    app: redis-ha
    heritage: "Helm"
    release: "argocd"
    chart: redis-ha-4.33.2
  annotations:
    {}
spec:
  selector:
    matchLabels:
      release: argocd
      app: redis-ha
  serviceName: argocd-redis-ha
  replicas: 3
  podManagementPolicy: OrderedReady
  updateStrategy:
    type: RollingUpdate
  template:
    metadata:
      annotations:
        checksum/init-config: bd30e83dfdad9912b6c1cc32a8c26d7d01429a0730f5ee7af380fb593e874d54
      labels:
        release: argocd
        app: redis-ha
        argocd-redis-ha: replica
    spec:
      terminationGracePeriodSeconds: 60
      affinity:
        podAntiAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            - labelSelector:
                matchLabels:
                  app: redis-ha
                  release: argocd
                  argocd-redis-ha: replica
              topologyKey: kubernetes.io/hostname
      securityContext:
        fsGroup: 1000
        runAsNonRoot: true
        runAsUser: 1000
      serviceAccountName: argocd-redis-ha
      automountServiceAccountToken: false
      initContainers:
      - name: config-init
        image: public.ecr.aws/docker/library/redis:7.2.7-alpine
        imagePullPolicy: IfNotPresent
        resources:
          {}
        command:
        - sh
        args:
        - /readonly-config/init.sh
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          runAsNonRoot: true
          runAsUser: 1000
          seccompProfile:
            type: RuntimeDefault
        env:
        - name: SENTINEL_ID_0
          value: 3c0d9c0320bb34888c2df5757c718ce6ca992ce6
        - name: SENTINEL_ID_1
          value: 40000915ab58c3fa8fd888fb8b24711944e6cbb4
        - name: SENTINEL_ID_2
          value: 2bbec7894d954a8af3bb54d13eaec53cb024e2ca
        - name: AUTH
          valueFrom:
            secretKeyRef:
              name: argocd-redis
              key: auth
        volumeMounts:
        - name: config
          mountPath: /readonly-config
          readOnly: true
        - name: data
          mountPath: /data



      containers:
      - name: redis
        image: public.ecr.aws/docker/library/redis:7.2.7-alpine
        imagePullPolicy: IfNotPresent
        command:
          - redis-server
        args:
          - /data/conf/redis.conf
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          runAsNonRoot: true
          runAsUser: 1000
          seccompProfile:
            type: RuntimeDefault
        env:
        - name: AUTH
          valueFrom:
            secretKeyRef:
              name: argocd-redis
              key: auth
        livenessProbe:
          initialDelaySeconds: 30
          periodSeconds: 15
          timeoutSeconds: 15
          successThreshold: 1
          failureThreshold: 5
          exec:
            command:
              - sh
              - -c
              - /health/redis_liveness.sh
        readinessProbe:
          initialDelaySeconds: 30
          periodSeconds: 15
          timeoutSeconds: 15
          successThreshold: 1
          failureThreshold: 5
          exec:
            command:
              - sh
              - -c
              - /health/redis_readiness.sh
        startupProbe:
          initialDelaySeconds: 5
          periodSeconds: 10
          timeoutSeconds: 15
          successThreshold: 1
          failureThreshold: 3
          exec:
            command:
              - sh
              - -c
              - /health/redis_readiness.sh
        resources:
          {}
        ports:
        - name: redis
          containerPort: 6379
        volumeMounts:
        - name: config
          mountPath: /readonly-config
          readOnly: true
        - mountPath: /data
          name: data
        - mountPath: /health
          name: health
        lifecycle:
          preStop:
            exec:
              command:
              - /bin/sh
              - /readonly-config/trigger-failover-if-master.sh
      - name: sentinel
        image: public.ecr.aws/docker/library/redis:7.2.7-alpine
        imagePullPolicy: IfNotPresent
        command:
          - redis-sentinel
        args:
          - /data/conf/sentinel.conf
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          runAsNonRoot: true
          runAsUser: 1000
          seccompProfile:
            type: RuntimeDefault
        env:
        - name: AUTH
          valueFrom:
            secretKeyRef:
              name: argocd-redis
              key: auth
        livenessProbe:
          initialDelaySeconds: 30
          periodSeconds: 15
          timeoutSeconds: 15
          successThreshold: 1
          failureThreshold: 5
          exec:
            command:
              - sh
              - -c
              - /health/sentinel_liveness.sh
        readinessProbe:
          initialDelaySeconds: 30
          periodSeconds: 15
          timeoutSeconds: 15
          successThreshold: 3
          failureThreshold: 5
          exec:
            command:
              - sh
              - -c
              - /health/sentinel_liveness.sh
        startupProbe:
          initialDelaySeconds: 5
          periodSeconds: 10
          timeoutSeconds: 15
          successThreshold: 1
          failureThreshold: 3
          exec:
            command:
              - sh
              - -c
              - /health/sentinel_liveness.sh
        resources:
          {}
        ports:
          - name: sentinel
            containerPort: 26379
        volumeMounts:
        - mountPath: /data
          name: data
        - mountPath: /health
          name: health
        lifecycle:
          postStart:
            exec:
              command:
              - /bin/sh
              - -c
              - sleep 30; redis-cli -p 26379 sentinel reset argocd

      - name: split-brain-fix
        image: public.ecr.aws/docker/library/redis:7.2.7-alpine
        imagePullPolicy: IfNotPresent
        command:
          - sh
        args:
          - /readonly-config/fix-split-brain.sh
        securityContext:
          allowPrivilegeEscalation: false
          capabilities:
            drop:
            - ALL
          runAsNonRoot: true
          runAsUser: 1000
          seccompProfile:
            type: RuntimeDefault
        env:
        - name: SENTINEL_ID_0
          value: 3c0d9c0320bb34888c2df5757c718ce6ca992ce6
        - name: SENTINEL_ID_1
          value: 40000915ab58c3fa8fd888fb8b24711944e6cbb4
        - name: SENTINEL_ID_2
          value: 2bbec7894d954a8af3bb54d13eaec53cb024e2ca
        - name: AUTH
          valueFrom:
            secretKeyRef:
              name: argocd-redis
              key: auth
        resources:
          {}
        volumeMounts:
        - name: config
          mountPath: /readonly-config
          readOnly: true
        - mountPath: /data
          name: data
      volumes:
      - name: config
        configMap:
          name: argocd-redis-ha-configmap
      - name: health
        configMap:
          name: argocd-redis-ha-health-configmap
          defaultMode: 0755
      - name: data
        emptyDir:
          {}
